199000543 - 1072B10 INLET MANIFOLD - R + R AND REPLACE SEAL
Removing
(
Refitting
)
Op. 1016A10 SOUND-PROOFING COVER - R.R Op. 4450B04 RIGHT FRONT WHEEL - R.R Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. Op. 1092G10 SINGLE ENGINE BELT - R.R Op. 1092A10 CRANKSHAFT PULLEY - R + R Op. 1048A10 AIR FILTER ASSEMBLY - R.R. Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - R + R Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R. Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT Op. 1060E30 PRESSURE PUMP DRIVE PULLEY - R.R. Op. 1060E10 DIESEL INJECTION PRESSURE PUMP - R.R. Op. 1060E40 PRESSURE PUMP SUPPORT - R.R.1. Undo the nuts (1a) and remove the intake manifold (1b).- Remove the gasket.
Refitting
(
Removing
)
- Place the gasket back in its housing.- Replace the intake manifold in its housing and secure it by tightening the nuts to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Intake manifold | Nut | M8 | 2.3 ÷ 2.8 | 1.2 8v1.4 8v1.9 Multijet |