199000571 - 1084A40 ENGINE OIL LEVEL SENSOR - R + R
Removing
(
Refitting
)
Op. 0010T40 CHANGE MANUAL GEARBOX OIL Op. 0010T10 CHANGE ENGINE OIL Op. 4450B04 RIGHT FRONT WHEEL - R.R Op. 3310A60 FRONT BRAKE PADS - REPLACE Op. 2710A14 RIGHT DRIVESHAFT WITH JOINTS AND INTERMEDIATE DRIVESHAFT - R+R Op. 2710A32 INTERMEDIATE DRIVESHAFT BEARING SUPPORT - R + R WITH INTERMEDIATE DRIVESHAFT REMOVED Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION Op. 1020A46 CRANKCASE OIL SUMP PARTITION - R.R. WITH CRANKCASE SUMP REMOVED 1. Withdraw clip (1a), unscrew the bolts and remove the engine oil level sensor (1b).
Refitting
(
Removing
)
- Place the engine oil level sensor in its housing, tighten the clipa nd tighten the bolts to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Engine oil level sensor | - | M6 x 1 | 1.0 | 1.9 Multijet |