199000665 - 5505A14 SUPPLEMENTARY JUNCTION BOX IN LUGGAGE COMPARTMENT - R.R

Removing ( Refitting ) Remove the parcel shelf.    Op. 7040B22 LUGGAGE COMPARTMENT/LOAD PLATFORM MOULDING - R+R     Op. 7040G30 BOOT LIGHT BULB HOLDER - R.R.    Op. 7040H42 REAR PILLAR TRIM (ONE), LEFT OR RIGHT- R.R     Op. 7040B06 SIDE TRIM (ONE) LEFT OR RIGHT, LOAD COMPARTMENT/LOAD PLATFORM - R.R. 1. Release the retainers (1a) and remove the control unit cover (1b). 1. Disconnect the electrical connection.

Description	Component
LUGGAGE COMPARMENT JUNCTION UNIT (CVB)	See B045 LUGGAGE COMPARTMENT JUNCTION UNIT (CVB)

2. Undo the nut.3. Move the control unit.4. Mark the reciprocal position of all terminals (4a) connected to the control unit.5. Use the COPAT extractor set art. 530/S to disconnect the terminals from the control unit.6. Keep the control unit.. Refitting ( Removing ) - Check that the control unit is not damaged.- Use the COPAT extractor set art. 530/S to connect the terminals to the control unit in accordance with the layout defined during removal.- Position the control unit and tighten the nut.- Connect the electrical earth connection.- Position the control unit cover and do up the retainers.    Op. 7040B06 SIDE TRIM (ONE) LEFT OR RIGHT, LOAD COMPARTMENT/LOAD PLATFORM - R.R.     Op. 7040H42 REAR PILLAR TRIM (ONE), LEFT OR RIGHT- R.R     Op. 7040G30 BOOT LIGHT BULB HOLDER - R.R.    Op. 7040B22 LUGGAGE COMPARTMENT/LOAD PLATFORM MOULDING - R+R