199000938 - 1820B56 RIGID PIPE FROM VIBRATION DAMPER TO SLAVE CYLINDER - R R

Removing ( Refitting ) Proceed as described below for left-hand drive version    Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 1820B58 CLUTCH HYDRAULIC CIRCUIT VIBRATION DAMPER - R+R 1. Undo connector and separate hose (1a) from rigid pipe (1b). Proceed as described below for right-hand drive version    Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R 1. Lift up retaining clip (1a) and disconnect rigid pipe (1b) from the vibration damper. 1. Open retaining clips (1a), lift up retaining clip (1b), disconnect hose (1c) and remove it complete with rigid pipe (1d). 1. Undo connector and separate hose (1a) from rigid pipe (1b). Refitting ( Removing ) Proceed as described below for left-hand drive version- Connect the rigid pipe to the hose and tighten the connector.    Op. 1820B58 CLUTCH HYDRAULIC CIRCUIT VIBRATION DAMPER - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR Proceed as described below for right-hand drive version- Connect the rigid pipe to the hose and tighten the connector.- Place the rigid pipe and hose back in their housing and secure them to the bodyshell with the retaining clips.- Connect the hose to the additional vibration damper and secure it with the retaining clip.- Connect the rigid pipe to the vibration damper and secure it with the retaining clip.    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR