3330B42 PEDAL UNIT SUPPORT - R.R. FOR RIGHT HAND DRIVE VERSIONS - Fiat - GRANDE PUNTO - eLearn

199001655 - 3330B42 PEDAL UNIT SUPPORT - R.R. FOR RIGHT HAND DRIVE VERSIONS

) Op. 1016A10 SOUND-PROOFING COVER - R.R Op. 1048A10 AIR FILTER ASSEMBLY - R.R. Op. 1044B10 FUEL FILTER ASSEMBLY - R + R OR REPLACE 1. Undo the nuts (1a) fixing the brake pump (1b) to the brake servo.2. Disconnect the vacuum pipe from the brake servo.

Op. 1068A21 ACCELERATOR PEDAL WITH INTEGRATED POTENTIOMETER - R.R. FOR RIGHT DRIVE VERSIONS Op. 7040A45 RIGHT DASHBOARD SIDE TRIM - R.R. Op. 7040A30 LEFT LOWER DASHBOARD TRIM - R.R.1. Disconnect the electrical connection for the brake pedal switch.

	Description	Connector
1	Brake pedal switch	See I030 BRAKE PEDAL SWITCH

- Disconnect the electrical connection for the clutch pedal switch.

	Description	Connector
-	Clutch pedal switch	See I031 CLUTCH PEDAL SWITCH

1. Remove the clip (1a) and the pin (1b) connecting the clutch pump fork to the pedal.2. Undo the bolts (2a) and move the clutch pump (2b) to one side.

1. Undo the bolt (1a) and disconnect the steering control shaft (1b) from the steering box pinion.

1. Undo the fastenings (1a) and remove the pedal support (1b) complete with brake servo.

1. Remove the clips (1a) and the pin (1b) connecting the brake servo fork to the brake pedal.2. Undo the nuts (2a) and remove the brake servo (2b) from the pedal mounting.

Refitting ( Removing

) - Fit the brake servo in its seat and tighten the nuts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Brake servo	Nut	M8	1.7 ÷ 2.6

- Connect the brake servo fork to the brake pedal using the pin and the retaining clips.- Refit the pedal mounting complete with brake servo and tighten the fastenings.- Connect the steering control shaft to the steering box pinion and tighten the bolt to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Steering column to steering box pinion	Bolt	M10	5.0 ÷ 6.0

- Fit the clutch pump in its housing and tighten the bolts.- Connect the clutch pump fork to the pedal using the pin and the retaining clip.- Connect the electrical connection for the clutch pedal switch.- Connect the electrical connection for the brake pedal switch. Op. 7040A30 LEFT LOWER DASHBOARD TRIM - R.R. Op. 7040A45 RIGHT DASHBOARD SIDE TRIM - R.R. Op. 1068A21 ACCELERATOR PEDAL WITH INTEGRATED POTENTIOMETER - R.R. FOR RIGHT DRIVE VERSIONS- Connect the vacuum pipe to the brake servo.- Tighten the nuts fastening the brake pump to the brake servo. Op. 1044B10 FUEL FILTER ASSEMBLY - R + R OR REPLACE Op. 1048A10 AIR FILTER ASSEMBLY - R.R. Op. 1016A10 SOUND-PROOFING COVER - R.R