2710A14 RIGHT DRIVESHAFT WITH JOINTS AND INTERMEDIATE DRIVESHAFT - R+R - Fiat - GRANDE PUNTO - eLearn

199002391 - 2710A14 RIGHT DRIVESHAFT WITH JOINTS AND INTERMEDIATE DRIVESHAFT - R+R

) Op. 0010T40 CHANGE MANUAL GEARBOX OIL Op. 4450B04 RIGHT FRONT WHEEL - R.R Op. 3310A60 FRONT BRAKE PADS - REPLACE 1. Remove the staking (1a), fit the tool (1b) and undo the wheel hub fixing nut.

Tool	Description	Function	Validity
1870815000	Counter-torque	Loosen/ tighten nut securing front drive shaft to wheel hub

1. Undo the bolt (1a) securing the ABS rpm sensor (1b) and move it aside.2. Undo the nut (2a), fit the tool (1b) and disconnect the steering rod (2c) from the steering knuckle.

Tool	Description	Function	Validity
1871000700	Extractor	Extracting steering rod from strut

3. Undo the bolts securing the shock absorber to the steering knuckle.4. Undo the bolt securing the steering knuckle to the lower track control arm.

- Disconnect the steering knuckle from the driveshaft.1. Undo the bolts (1a) and remove the right driveshaft (1b) complete with intermediate driveshaft (1c).

Refitting ( Removing

) - Place the right driveshaft complete with joints and intermediate driveshaft in its housing.- Tighten the bolt securing the steering knuckle to the lower track control arm to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front suspension lower wishbone - strut side	Bolt	M10	5.4 ÷ 6.6

- Connect the shock absorber to the steering knuckle and tighten the new bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front shock absorber - strut side	Bolt (to be replaced)	M12	10.3 ÷ 12.6 + 45°

- Connect the steering rod to the steering knuckle and secure it tightening the nut to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Steering rod to pillar	Nut	M10	3.6 ÷ 4.4

- Place the ABS rpm sensor in its housing and secure it using the bolt.- Tighten the new nut securing the wheel hub to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front wheel hub	Nut (to be replaced)	M24 x 1.5	6.6 ÷ 7.3 + 62° +/- 2°	1.4 16v TJet1.3 Multijet1.9 Multijet

1. Stake the nut.

Op. 3310A60 FRONT BRAKE PADS - REPLACE Op. 4450B04 RIGHT FRONT WHEEL - R.R Op. 0010T40 CHANGE MANUAL GEARBOX OIL