199002504 - 7210E38 R.R. REAR SIDE DOOR

Removing ( Refitting ) - Lower the window to the end of travel position.1. Undo the bolts (1a) fixing the limiter link (1b) to the body, then close the door momentarily so that the link is inside.2. Disconnect the electrical connection.

Description	Component
LEFT REAR DOOR COUPLING	See D035 LEFT REAR DOOR COUPLING
RIGHT REAR DOOR COUPLING	See D036 RIGHT REAR DOOR COUPLING

3. Undo the bolts for the hinges.4. Lift up the door and remove it. Refitting ( Removing ) - Check that the door is not damaged.1. Place the door on the hinges.2. Tighten the bolts for the hinges to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Moving hinges on fixed	Bolt	M6	1.2 ÷ 1.8

3. Connect the electrical connection.- Check that the various consumers on the door are working.4. Pull out limiter (4a) out and tighten the bolt (4b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Door detent link (body side)	Bolt	M8	2.25 ÷ 2.75

- Check the door alignment and, if necessary, carry out:    Op. 7010A14 REAR SIDE DOOR - ADJUST CENTERING AND MOULDING - INCLUDES ADAPTATION OF HINGES AND SEALS ON DOOR COMPARTMENT