199000105 - 1060G28 FUEL PRESSURE SENSOR ON FUEL MANIFOLD TO INJECTORS - R.R

Removing ( Refitting )

If the fuel pressure sensor is being replaced, when the refitting is complete the following operations must be carried out using the Examiner.

- Position the vehicle on a lift.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 1048B27 RIGID PIPE FOR AIR INLET TO THROTTLE BODY - R R    Op. 5530B10 BATTERY - R+R 1. Disconnect the electrical connection from the fuel pressure sensor on the fuel manifold.

	Description	Connector
1	Fuel pressure sensor	See K083 FUEL PRESSURE SENSOR

2. Undo the fuel pressure sensor from the fuel manifold and remove it. Refitting ( Removing ) - Place the fuel pressure sensor in position on the fuel manifold and tighten it to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Fuel pressure sensor - fuel manifold side	-	M	6.5 ÷ 7.5	1.9 Multijet

- Secure the electrical connection to the fuel pressure sensor on the fuel manifold.    Op. 5530B10 BATTERY - R+R     Op. 1048B27 RIGID PIPE FOR AIR INLET TO THROTTLE BODY - R R    Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. - Remove the vehicle from the lift.