7045D31 FRONT SEAT BACKREST COVER, LEFT OR RIGHT - R.R. WITH SEAT REMOVED - Fiat - GRANDE PUNTO - eLearn

199000338 - 7045D31 FRONT SEAT BACKREST COVER, LEFT OR RIGHT - R.R. WITH SEAT REMOVED

) Op. 7045B10 FRONT SEAT HEAD RESTRAINT, LEFT OR RIGHT - R.R. Op. 7045A48 LEVER AND TRIM FOR FOLDING BACKREST - R.R. Op. 7045A24 FRONT SEAT BACKREST ANGLE ADJUSTMENT KNOB (ONE), LEFT OR RIGHT - R.R. Op. 7045A56 DRIVER'S SEAT HEIGHT ADJUSTMENT DEVICE CONTROL LEVER - R.R Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R Op. 7045A44 FRONT SEAT INTERIOR GUARD (ONE), LEFT OR RIGHT - R.R 1. Open the zip fastener (1a) along the entire section (1b).2. Disconnect the lower two ends of the backrest cover attached to one another.3. Raise the backrest trim as far as possible.

1. Undo retainers (1a) and withdraw the backrest bushes (1b).2. Remove the seat trim with padding (2b) from seat frame (2a).

- If necessary, separate the backrest trim from the padding as described below.1. Prise up the trim by releasing from the padding edge.2. Use cutters to cut all the front backrest trim retainers.3. Separate the trim (3a) from padding (3b).

Refitting ( Removing

) - Check that the backrest trim is not damaged.- If removed, position the backrest trim on the padding and crimp the retainers using special pliers.

Mould the cover on the upholstery during the various refitting stages.

- Fit the trim on the upper padding area.- Place the head restraint bushes in position and attach the retainers.

Both head restraint bushes have different retainers and engagement seats.

- Position the padding on the seat frame and fit the backrest trim on the padding.- Connect the lower two ends of the backrest cover attaching them to one another.- Close the zip fastening along the entire length. Op. 7045A44 FRONT SEAT INTERIOR GUARD (ONE), LEFT OR RIGHT - R.R Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R Op. 7045A56 DRIVER'S SEAT HEIGHT ADJUSTMENT DEVICE CONTROL LEVER - R.R Op. 7045A24 FRONT SEAT BACKREST ANGLE ADJUSTMENT KNOB (ONE), LEFT OR RIGHT - R.R. Op. 7045A48 LEVER AND TRIM FOR FOLDING BACKREST - R.R. Op. 7045B10 FRONT SEAT HEAD RESTRAINT, LEFT OR RIGHT - R.R.