199000340 - 7045M22 HEATER PAD FOR FRONT SEAT CUSHION, LEFT OR RIGHT - R.R. FOLLOWING ELECTRICAL CIRCUIT CHECK
Removing
(
Refitting
)
Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R. Op. 7045A24 FRONT SEAT BACKREST ANGLE ADJUSTMENT KNOB (ONE), LEFT OR RIGHT - R.R. Op. 7045A56 DRIVER'S SEAT HEIGHT ADJUSTMENT DEVICE CONTROL LEVER - R.R Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R Op. 7045A44 FRONT SEAT INTERIOR GUARD (ONE), LEFT OR RIGHT - R.R Op. 7045D21 FRONT SEAT CUSHION COVER, LEFT OR RIGHT - R.R. WITH SEAT REMOVED- Separate the cushion cover from the upholstery.1. Remove the heater pad (1a) detaching the adhesive surface from the upholstery, then extract the wiring (1b) through the opening (1c). | If fitted, take care not to damage the passenger presence sensor (1d). |
Refitting
(
Removing
)
- Check that the heater pad is not damaged.- If the heater pad detached previously is being reused, fit spray glue for plastics in the adhesive area.- If a new heater pad is being used, remove the protective film from the adhesive section.- Insert the wiring for the heater pad in the opening.- Place the heater pad in position centering it in the upholstery splining. | If fitted, take care not to damage the passenger presence sensor. |