1088B20 ENGINE COOLING RADIATOR - R + R - Fiat - GRANDE PUNTO - eLearn

199000586 - 1088B20 ENGINE COOLING RADIATOR - R + R

) - Disconnect the negative battery terminal. Op. 5540B07 LEFT FRONT HEADLAMP - R.R Op. 5540B08 RIGHT FRONT HEADLAMP - R.R Op. 7210A15 R.R. FRONT WING/HEADLAMP HOUSING CROSSMEMBER Op. 7210E10 R.R. FRONT BUMPER Op. 1048B50 SUPERCHARGING AIR-AIR HEAT EXCHANGER - R.R. Op. 0010T20 ENGINE COOLANT - CHANGE Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. 1. Disconnect the lower radiator coolant outlet hose.

- Lower the vehicle.1. Loosen the band and disconnect the radiator lower coolant outlet hose.2. Unscrew the coolant reservoir bolts and move aside.

1. Disconnect the rapid connector for the radiator upper coolant inlet hose, radiator side.

1. Remove the fan guards.2. Disconnect the fan wiring electrical connections.

	Description	Connector
2	Engine fan motor	See N011 FAN MOTOR

	Description	Connector
2	Engine fan motor - 2	See N012 ENGINE FAN MOTOR - 2

3. Disconnect the electrical connections from the rheostats.

	Description	Connector
3	Engine fan adjustment resistance	See O010 ENGINE FAN ADJUSTMENT RESISTANCE - 1

	Description	Connector
3	Engine fan 2 adjustment resistance	See O012 ENGINE FAN ADJUSTMENT RESISTANCE - 2

1. Unscrew the bolt securing the condenser to the fan frame.

1. Unscrew bolt (1a) and nut (1b) securing the condenser pipes to the body.

1. Undo the bolts and remove the condenser from the radiator and secure to the sacrificial beam.

- Open the clips securing the wiring to the fan frame.1. Undo the bolts fixing the radiator to the wing join assembly seal.2. Remove the radiator unit with fans.

1. Loosen the band and remove the engine coolant supply pipe.2. Undo the bolts and remove the fans from the radiator.

Refitting ( Removing

) - Fit the fans on the radiator and secure it using the bolts.- Refit the engine cooling system feed pipe in its seat and do up the band.- Place the radiator complete with fans in position.- Tighten the bolts fixing the radiator to the wing join assembly seal.- Do up the clips securing the wiring to the fan frame.- Secure the condenser to the radiator and tighten the bolts.- Tighten the bolt and nut securing the condenser pipes to the body.- Tighten the bolt securing the condenser to the fan frame.- Connect the electrical connections to the rheostats.- Connect the fan wiring electrical connections.- Place the fan guards in their housings.- Connect the rapid connector for the radiator upper coolant inlet hose, radiator side.- Place the coolant reservoir in its housing and secure it using the bolts.- Connect the reservoir coolant outlet hose and tighten the band.- Raise the vehicle.- Connect the lower radiator coolant outlet hose. Op. 0010T20 ENGINE COOLANT - CHANGE Op. 1048B50 SUPERCHARGING AIR-AIR HEAT EXCHANGER - R.R. Op. 7210E10 R.R. FRONT BUMPER Op. 7210A15 R.R. FRONT WING/HEADLAMP HOUSING CROSSMEMBER Op. 5540B08 RIGHT FRONT HEADLAMP - R.R Op. 5540B07 LEFT FRONT HEADLAMP - R.R Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. - Connect the negative battery terminal.