199000619 - 5570 ACCESSORIES
AUDIO SYSTEM
There are four different levels of acoustic system available on the vehicle:- standard car radio (with CD / MP3 player);- Hi-Fi sound system (with 6 speakers and a subwoofer);- INTERSCOPE Hi-Fi sound system (with 6 speakers, subwoofer and multi-channel amplifier);- aftermarket radio preparation.There is also the possibility of a telematic system with Bluetooth radio telephone function and Mediaplayer.Lastly it is possible to prepare the system for the connection of an aftermarket navigation system.General specifications of the standard system
The system comprises of 6 speakers as illustrated in the diagram:1 - Radio2 - Front door midwoofer speakers3 - Tweeter front speakers4 - Midwoofer rear speakers5 - AerialFront speakers
They are 165 mm diameter 40W mid-woofer speakers located in the front doors.They are designed for the reproduction of medium-low frequencies. The (water resistant) technology used for these components allows them to withstand possible sprays of water inside the door without being damaged.Front tweeters
These are 30W tweeter speakers located next to the door opening handle and are designed to reproduce higher frequencies.Rear speakers
These are 130 mm diameter 40W full-range speakers located in the rear side panels (3 door version) or in the rear door (5 door version) capable of reproducing the entire audio frequency spectrum.Water resistant technology has been adopted for these components as well.Aerial
The monofunction (radio only) aerial support, located on the roof of the vehicle at the rear is the "separate supply" type because it has two connecting bridges (coaxial radio signal transmission cable and power supply line).The monofunction aerial stem is 36 cm long.The support is marked by a coloured seal to which the stem of the aerial is tightened with a flag of the same colour to prevent different types from being fitted.The coaxial cable has an extension included in the vehicle rear and dashboard wiring which reaches the radio itself.In the case of the Bluetooth hands-free option, the aerial is the Phantom Power type.It has only one connecting bridge for the radio aerial (a coaxial cable for the power supply and transmission of the radio signal).The mounting with a separate power supply is illustrated in the diagrams;1 - coaxial cable2 - power supplyGeneral specifications of the hi-fi sound system with subwoofer
This system is composed of 6 speakers and a sub-woofer box containing a power amplifier as illustrated in the diagram:1 - Radio2 - Front door midwoofer speakers3 - Tweeter front speakers4 - Midwoofer rear speakers5 - Sub-woofer box6 - AerialFront speakers
They are 165 mm diameter 40W mid-woofer speakers located in the front doors.They are designed for the reproduction of medium-low frequencies. The (water resistant) technology used for these components allows them to withstand possible sprays of water inside the door without being damaged.Front tweeters
These are 30W tweeter speakers located next to the door opening handle and are designed to reproduce higher frequencies.Rear speakers
These are 130 mm diameter 40W full-range speakers located in the rear side panels (3 door version) or in the rear door (5 door version) capable of reproducing the entire audio frequency spectrum.Water resistant technology has been adopted for these components as well.Subwoofer box
The 6-7 litre (approx.) volume bass-reflex type sub-woofer box contains a 130 mm diameter 100W speaker for the reproduction of low frequencies.This box is located in the luggage compartment, right wheel arch side.A mono-channel audio power amplifier located in the subwoofer box drives the subwoofer; a protective fuse (F) protects the power supply to the amplifier.F = protective fuseC = electrical connectionAerial
The aerial mounting and the aerial are the same as in the standard version.Interscope hi-fi sound system
The Interscope audio system is characterised by an aggressive sound specifically aimed to please young people.The system is composed of 6 speakers, a power amplifier and a subwoofer box for deep bass.Front speakers
These are 165 mm diameter mid-woofer speakers, with a polypropylene membrane for clean mid-range frequencies and precise bass; the power is 30 Wrms.There are positioned in the front doors.Front tweeters
These are Tweeters with neodymium magnets and treated silk membranes for crystaline treble; the power is 20 Wrms.They are positioned next to the door latch.Rear speakers
These are 130 mm diameter full-range speakers, with copper rings for acoustics without distortion; the power is 30 Wrms.They are positioned in the rear side panels (3-door version) or in the rear door (5-door version).Subwoofer
The subwoofer speaker is amplified with 2 channels (2 x 25 Wrms) with a double coil speaker for deep and powerful bass frequencies.This box is located in the luggage compartment, right wheel arch side.A mono-channel audio power amplifier located in the subwoofer box drives the subwoofer; a protective fuse (F) protects the power supply to the amplifier.Amplifier
This is a 4 channel (4 x 30 Wrms) amplifier that optimises the sound to suit the vehicle shape and gives perfect sound spatiality.It is located under the dashboard, passenger side.AMPLIFIER CONNECTIONS PIN OUTConnector A| PIN | SIGNAL |
|---|
| 1 | input - front speaker RH |
| 2 | input - front speaker LH |
| 3 | n.c. |
| 4 | output - rear speaker LH |
| 5 | output + rear speaker LH |
| 6 | output + front speaker LH |
| 7 | input + front speaker RH |
| 8 | input + front speaker LH |
| 9 | n.c. |
| 10 | output - front speaker RH |
| 11 | output + front speaker RH |
| 12 | output + rear speaker RH |
| 13 | output - rear speaker RH |
| 14 | output - front speaker LH |
Connector B| PIN | SIGNAL |
|---|
| 1 | +30 |
| 2 | earth |
| 3 | input - rear speaker RH |
| 4 | input - rear speaker LH |
| 5 | n.c. |
| 6 | n.c. |
| 7 | n.c. |
| 8 | enablement (positive signal) from car radio |
| 9 | input + rear speaker RH |
| 10 | input + rear speaker LH |
Car radio preparation trim level
The vehicle can be fitted, on request, with a simple AFTERMARKET preparation, (opt. 082) that includes the same speakers and connections as the standard version, but does NOT include the car radio which can be fitted in the aftermarket. | The radio installed in the aftermarket is therefore not a CAN network node through which information is exchanged with the Body Computer and with the other electronic units. |
Two connections are supplied: one (connector A of P20) with the following standard ISO pin out:| Pin | Function |
|---|
| 1 | n.c. |
| 2 | n.c. |
| 3 | n.c. |
| 4 | +30 |
| 5 | aerial power supply |
| 6 | + lights |
| 7 | +15 |
| 8 | earth |
The second connection (connector B of P20) for connection with the speakers is the same as the standard version.Speakers
These are the same as the standard version.Aerial
The monofunction aerial support, located on the roof of the vehicle at the rear is the "separate supply" type because it has two connecting bridges, one for the power supply and one for the transmission of the radio signal.The monofunction aerial stem is 36 cm long.The support is marked by a coloured seal to which the stem of the aerial is tightened with a flag of the same colour to prevent different types from being fitted.The coaxial cable has an extension included in the vehicle rear and dashboard wiring which reaches the radio itself.Navigator preparation trim level
The vehicle may be fitted, on request, with NAVIGATOR preparation which includes the same speakers and connections for the installation in the aftermarket of a navigator with maps. | The navigator installed in the aftermarket is therefore not a CAN network node through which information is exchanged with the Body Computer and with the other electronic units. |
Two connections are supplied: one (connector A of P20) with the following pin out, specifically for a commercial navigator with maps.| Pin | Function |
|---|
| 1 | speedometer signal |
| 2 | n.c. |
| 3 | reverse signal |
| 4 | + 30 |
| 5 | aerial power supply |
| 6 | + lights |
| 7 | + 15 |
| 8 | earth |
The second connection (connector B of P20) for connection with the speakers is the same as the standard version.Speakers
These are the same as the standard version.Aerial
The dual function aerial support (radio and GPS), located on the roof of the vehicle at the rear is the "separate supply" type because it has two connecting bridges, one for the power supply and one for the transmission of the radio signal.The support is marked by a coloured seal to which the stem of the aerial is tightened with a flag of the same colour to prevent different types from being fitted.The coaxial cable has an extension included in the vehicle rear and dashboard wiring which reaches the radio itself.CAR RADIO - UNTIL JANUARY 2006
The Radio Receiver Node (RRN) is in a DIN housing, usually located in the middle of the dashboard.There are two versions: Radio CD, and Radio CD/MP3.Both have a front section that is tinted or painted.All versions are prepared for connection with the low speed CAN interface at the B-CAN to allow dialogue with the other system nodes. The following are transferred via this interface:- Anti-theft code;- On control (for switching-off logic);- Speed dependent volume control;- Lighting control;- Remote controls from the steering wheel, where fitted;- Repetition of radio information at control panel;Specifications
General specifications
- Music audio power: 4x30W- 7 band graphic equalizer- 2IC digital tuner with SHARX function- Large dimension alphanumerical display (20 characters for RDS functions + control symbol)- Easy to manage menu for the adjustment of the radio settings and any external interfaces (CD-Changer, telephone)- Mute function by pressing the volume control briefly- Soft mute, during radio source/station changing operations- Volume adjustment according to the vehicle speed (selected using the menu)- Radio switching off timer adjustment (immediately or 20 minutes after the key off)- Phantom-Power aerial power supply- Remote control from the steering wheel (opt.)- Possibility of interface with external Blaupunkt CD-Changer via ASCI-BUS line- Possibility of connecting hands-free kit for mobile phone- Hi-fi system active check, where fittedRadio specifications (radio cd and radio cd/mp3)
- High selectivity digital tuning (2IC) with SHARX function (digital selection with dynamically variable broad band)- FM multipath detector- Possibility of selecting HICUT function (High-Cut: dynamic reduction of high sounds on the basis of the RF signal)- Autostore (automatic memorizing of radio stations with best signal)- RDS (Radio Data System) with EON, AF (alternative frequencies), TA, TP, PTY and REG function (that can be selected by the user)- Automatic and manual search for stations- Possibility of adjusting Local/Distance for automatic frequency search- Possibility of programming:. 18 FM stations (6 of which can be memorized through autostore).. 6 MW stations. 6 LW stations. 6 PTY programme type stations (FM only)- 2 scan modes (short listen to a station and automatic transfer to the next):- Scanning the frequency band used- Scanning programmed stations.Cd specifications
- Motorized loading and | ... DATA ERROR - CROPPED TEXT | Ошибка данных - Текст обрезан ... |
|---|
