199000664 - 5050B64 RAIN SENSOR ELECTRONIC UNIT - R.R
Removing
(
Refitting
)
1. Release the cover.2. Lift up the mounting (2a) for the rear view mirror, releasing it from the retaining ring nut (2b) fastened to the window.
2. Remove the retaining clip (2a) releasing the retainers (2b).3. Remove the rain sensor.
Refitting
(
Removing
)
- Check that the rain sensor is not damaged.- Avoid touching the sensitive surface of the sensor.- Avoid the sensitive surface of the sensor coming into contact with dirt or fluids.- Clean the housing for the sensor in the windscreen thoroughly.Use a degreasing product.1. Place the rain sensor in position resting the opposite side on the connector.2. Press the sensor casing against the retaining ring nut and push toward the side of the connector.Press until attached.3. Fit the retaining clip on one side of the sensor, inserting it in the special guide. Secure the other side of the clip and press gently until it is attached.4. Connect the electrical connection.
- Attach the support for the rear view mirror to the retaining ring nut secured to the window.- Attach the cover.
Removing
(
Refitting
)
1. Release the cover.2. Lift up the mounting (2a) for the rear view mirror, releasing it from the retaining ring nut (2b) fastened to the window.
