| | Results of the tests |
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
|---|
| Connect the Examiner diagnostic equipment to the diagnostic socket.Check that there are no faults in the ABS control unit | Move on to Step 2 | 1. Error detected in the control unit2. No communication with the control unit | 1. Continue following the instructions for the diagnostic equipment2. Restore:- Connection between the ABS control unit and the diagnostic connector - ABS control unit supply See E7020 ABS |
| 2 | ACTIVE DIAGNOSIS WITH DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
|---|
| Keeping the Examiner diagnostic equipment connected carry out the active diagnosis of:- pump motor;- solenoid valves. | Move on to Step 3 | Fault detected in the pump or in a solenoid valve | Replace the ABS electronic control unit electrohydraulic unit Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT - R.R. |
| 3 | VACUUM PIPE CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the vacuum pipe is correctly fitted/in good condition | Move on to Step 4 | 1. Pipe not fitted correctly or bent2. Pipe damaged | 1. Refit correctly2. Replace vacuum pipe Op. 3330D26 VACUUM PIPE FOR BRAKE SERVO ASSEMBLY - R.R |
| 4 | BRAKE SERVO SINGLE-ACTING VALVE CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the brake servo single-acting valve is working properly | Move on to Step 5 | Single-acting valve not working properly | Clean the one-way valve if it is fouled or dirty, or else replace it Op. 3330D20 SINGLE-ACTING VALVE FOR BRAKE SERVO - R+R |
| 5 | BRAKE SERVO VACUUM CHECK | All OK | Problems encountered | Operation |
|---|
| Check the condition of the brake servo vacuum unit.Check the condition of the vacuum pipe and the connectors and bands | Move on to Step 6 | 1. Brake servo vacuum unit faulty2. Pipe damaged | 1. Replace the brake servo vacuum unit Op. 3330D30 VACUUM UNIT - R+R 2. Renew the fastenings or replace the vacuum pipe |
| 6 | BRAKE SERVO CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the brake servo is working properly See Test 3330DA CHECK VACUUM PUMP OPERATION AND BRAKE SERVO VACUUM CIRCUIT | End of diagnosis | Brake servo not working properly | Replace brake servo Op. 3330D02 BRAKE SERVO/BRAKE PUMP ASSEMBLY - R.R. |
