| | Results of the tests |
| 0 | PRELIMINARY CHECK | All OK | Problems encountered | Operation |
|---|
| Check:- that the panel brightness adjustment has not been selected;- that the mode button has not been pressed;- that dashes are not displayed in place of the temperature;- that failure messages have not been displayed | Move on to Step 1 | 1. Display shows other information2. There are dashes instead of the temperature. | 1. Restore display conditions using the control panel2. Move on to Step 2 |
| 1 | ELECTRICAL CIRCUIT CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the connections for the outside temperature sensor in the Driver''s Door Node are correct.Check that the outside temperature sensor is working properly | Move on to Step 2 | 1. Connections defective2. Temperature sensor defective | 1. Restore the correct connections, if necessary, replace the wiring see wiring diagram See E6020 AIR CONDITIONING 2. Replace the temperature sensor Op. 7005R30 ELECTRICALLY CONTROLLED DOOR MIRROR (ONE) - R+R |
| 2 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
|---|
| Connect the Examiner diagnostic equipment to the diagnostic socket.Check:- that there are no faults in the instrument panel- that there are no faults in the driver''s door node | End of diagnosis | 1. Instrument panel defective2. Driver''s door node defective | 1. Replace instrument panel Op. 5560B10 CONTROL PANEL - R+R 2. Replace the driver''s door nodeOp. 5505A42 CONTROL UNIT (DIGITAL NETWORK NODE) IN DRIVER'S DOOR - R.R. |
