199000830 - K009 DOORS OPEN CHECK WARNING LIGHT/SYMBOL ON

After having carried out the initial test, the doors open check warning light in the "Instrument Panel Node" remains on constantly

		Results of the tests
0	PRELIMINARY CHECKS	All OK	Problems encountered	Operation
	Check that all four doors are properly shut	Move on to Step 1	Doors not properly shut	Shut the doors properly
1	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Using an Examiner check, in Instrument Panel mode, that there are no errors and that the parameters are present.	Move on to Step 2	1. Impossible to connect with the Instrument Panel control unit2. Presence of errors	1. Move on to Step 22. Continue following the instructions on the diagnostic instrument
2	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Using the Examiner check, in the Body Computer Node ambient, that there are no errors and that the door status parameters vary	Move on to Step 4	The parameters do not change	Move on to Step 3
3	ELECTRICAL CONNECTION CHECK	All OK	Problems encountered	Operation
	- Check that the door switches in the geared motors are working properly- Check the insulation to earth of the connection between the door switches and the Body Computer    See E3040 CENTRAL LOCKING	Move on to Step 4	1. Switches defective2. Wiring with imperfect insulation to earth	1. Replace the switches2. Restore wiring insulation
4	ACTIVE DIAGNOSIS CHECK	All OK	Problems encountered	Operation
	With the Examiner in the Instrument Panel Node ambient check that the doors open check warning light is correctly activated in Active Diagnosis	Move on to Step 5	The doors open check warning light is not activated	Replace the Instrument Panel    Op. 5560B10 CONTROL PANEL - R+R
5	CHECK ON CORRECT OPERATION	All OK	Problems encountered	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Replace Body Computer    Op. 5505A32 BODY COMPUTER - R.R