199000856 - K104 DISPLAY DOES NOT SHOW HEADLAMP ALIGNMENT DATA

When the buttons which control the headlamp alignment are operated (with the dipped headlamps on) the information on the display does not change. If the headlamp alignment is not working    See table I080 HEADLAMP ALIGNMENT CORRECTOR NOT WORKING

		Results of the tests
1	HEADLAMP ALIGNMENT ELECTRICAL CIRCUIT CHECK	All OK	Problems encountered	Operation
	Check: - connection between left control panel and NQS;- left control panel earth- connection between dashboard control unit and instrument panel    See E3080 HEADLAMP AGLINMENT CORRECTOR	Move on to Step 2	1. Connections not correct2. Earths defective	1. Restore the correct connections2. Repair the earth contacts
2	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the diagnostic equipment (Examiner Plus or Smart) to the diagnostic socket and check in active diagnosis at the instrument panel that all the display segments are working properly	End of diagnosis	One or more segments not working	Replace the instrument panel    Op. 5560B10 CONTROL PANEL - R+R