199000860 - K143 ONE WARNING LIGHT ACTIVATED BY STEERING COLUMN SWITCH UNIT NOT WORKING

When the lights are activated using the stalk, the relevant warning light does not light up on the instrument panel

The warning lights activated when the stalk is operated are:- Side lights/number plate lights- Main beam headlamps- Direction indicators

		Results of the tests
0	PRELIMINARY CHECKS	All OK	Problems encountered	Operation
	With the key ON, operate all the lights from the stalk, i.e.:- using the wheel, side lights/number plate lights;- with the stalk, high beams (both fixed and flashing positions);- with the stalk, direction indicators (right and left) and check they are activated	Move on to Step 1	1. The side lights do not work2. The high beams do not work3. The turn signals do not operate on both sides4. The turn signals do not operate on one side only	1. Continue as indicated    See table I001 SIDE LIGHTS/NO. PLATE LIGHTS NOT WORKING 2. Continue as indicated    See table I006 MAIN BEAM HEADLAMPS NOT WORKING 3. Continue as indicated    See table I010 DIRECTION INDICATORS / HAZARD WARNING LIGHTS NOT WORKING 4. Continue as indicated    See table I012 LEFT OR RIGHT DIRECTION INDICATORS NOT WORKING
1	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the diagnostic equipment and check the operation of the warning lights in question in active diagnosis at the Instrument Panel Node	End of diagnosis	The warning lights do not come on	Replace the Instrument Panel    Op. 5560B10 CONTROL PANEL - R+R