| | Results of the tests |
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
|---|
| Using an Examiner check, in Instrument Panel mode, that there are no errors and that the parameters are present. | Move on to Step 2 | 1. System fault2. Presence of errors | 1. Move on to Step 22. Continue as described by the diagnostic equipment |
| 2 | ACTIVE DIAGNOSIS CHECK | All OK | Problems encountered | Operation |
|---|
| With the Examiner in Air Bag Node mode check that the seat belt unfastened warning light is correctly activated in Active Diagnosis. | Move on to Step 3 | The seat belt unfastened warning light does not flash | Replace the Instrument Panel Op. 5560B10 CONTROL PANEL - R+R |
| 3 | CHECK THE SEAT BELT SWITCH | All OK | Problems encountered | Operation |
|---|
| Check that the seat belt switch is working properly | Move on to Step 4 | Seat belt not fastened switch defective | Replace the belt attachment with switch Op. 7065A14 ANCHORAGE ROD FOR , (ONE), FRONT SEAT BELT LEFT OR RIGHT - R.R. |
| 4 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
|---|
| Using the Examiner check, in Air Bag Node mode, that there are no errors and that the parameters are present. | End of diagnosis | Fault persists | Replace the Air Bag control unit Op. 5580C14 AIR BAG ECU - R+R |
