199000865 - K158 GENERAL FAILURE WARNING LIGHT NOT WORKING

Even if one of the functions signalled by the general failure warning light is faulty, the warning light in the instrument panel does not come on

The following functions cause the activation of the general failure warning light:- Inertia switch (FIS) operation- Windscreen wiper automatic operation not available- Parking sensor failure (if fitted)- Dusk sensor failure (if fitted)- Engine oil pressure sensor failure- Brake pad wear- Rain sensor failure (if fitted)- Exterior lights failure: side light, number plate light, rear fog lamp, direction indicator, brake light- Pollution filter blocked (JTD version only)

		Results of the tests
1	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the diagnostic equipment and check the operation of the general failure warning light in active diagnosis at the INSTRUMENT PANEL NODE	End of diagnosis	The warning light is not activated	Replace the Instrument Panel    Op. 5560B10 CONTROL PANEL - R+R