199000868 - N001 CIGAR LIGHTER/CURRENT SOCKET NOT WORKING

When the cigar lighter is pressed or a consumer is connected to the special connection, the cigar lighter / current socket does not work.

All the sockets are equipped with a thermal protection device: this protection cuts off the power supply if devices that absorb a lot of energy are connected.

		Results of the tests
1	CIGAR LIGHTER CHECK	All OK	Problems encountered	Operation
	Check the cigar lighter/current socket and, in particular, make sure that the internal thermal protection device has not intervened as the result of overloading	Move on to Step 2	Thermal protection intervened	Replace the cigar lighter/current socket    Op. 7065C72 FRONT CIGAR LIGHTER SOCKET - R.R.
2	CIGAR LIGHTER ELECTRICAL CIRCUIT CHECK	All OK	Problems encountered	Operation
	Check the following, in order:- Cigar lighter fuse- Cigar lighter relay- Cigar lighter power supply and earth- Continuity and insulation of cigar lighter electrical circuit    See E3070 CIGAR LIGHTER / CURRENT SOCKET	Move on to Step 3	1. Component defective2. Connections not correct	1. Replace the component (in the case of a fuse, find out what caused it to blow)2. Repair the connections    See E3070 CIGAR LIGHTER / CURRENT SOCKET