199001476 - E8010 DESCRIPTION OF MULTIPLE DIAGNOSTIC CONNECTOR

DESCRIPTION

The vehicle is equipped with numerous electronic control units with an autodiagnostic function. When a diagnostic tester (Examiner or other device) is connected to these control units, self-diagnosis data can be read (parameters, errors) or the available active diagnostic tests can be carried out.All the diagnostic lines flow into the EOBD connector (European On Board Diagnosis) which conforms with Directive 98/69/CE (EURO 3) - ISO standard J1962 - located under the dashboard to the left of the driver above the Body Computer.Via the same connector it is possible to diagnose all the nodes (control units) connected to the low speed B-CAN network and the high-speed C-CAN dynamic control network.    See E1050 CAN CONNECTION LINES

This version does NOT include individual diagnostic K lines that control individual control units.