199001713 - 7210A54 R.R. - CONTROL UNIT MOUNTING BRACKET ON LEFT UPPER STRUT

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5505A13 ADDITIONAL JUNCTION UNIT IN ENGINE COMPARTMENT - R.R.     Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R.     Op. 7210E10 R.R. FRONT BUMPER     Op. 5540B07 LEFT FRONT HEADLAMP - R.R Remove the left wing.    Op. 7210E18 R.R. FRONT WING - Check that the components connected are not distorted by checking the bodyshell alignment measurements using suitable equipment (gauges, templates or jigs).- Straighten the body as necessary. - Use a rotary brush to remove the paint and gain access to the spot welds.1. Use the chamfering machine to remove the spot welds shown in the diagram.- Use the drill to chamfer the spot welds that aren''t accessible to the chamfering machine.- Use a hammer and chisel to remove the previously chamfered spot welds.2. Remove the part from the vehicle. - Straighten the edges of the vehicle using a hammer and dolly block.- Remove the spot weld residues using a disc grinder.- Use a rotary brush to clean the previously treated areas.1. Apply electro-galvanizing paint. Refitting ( Removing ) 1. Remove the anti-corrosion treatment from the entire perimeter of the inside and outside of the replacement part using a rotary brush.2. Drill out the part at the indicated points.- Apply electro-weldable paint to the edges involved. 1. Position the replacement part correctly on the vehicle and secure it using self-locking clamps.- Check the alignment and the surrounding gaps.2. Use a spot welder to weld the areas shown in the diagram.3. Use a MIG welder to fill weld the openings made previously. - Correct any distortions to the panel using a mallet and dolly block.1. Use a disc grinder to level the welds.- Use a rotary brush to clean the previously welded areas. 1. Apply anti-oxidant protection to the areas involved in the welding.- Seal the join lines between the replacement part and the vehicle.- Proceed with the painting stage.     Op. 7210E18 R.R. FRONT WING     Op. 5540B07 LEFT FRONT HEADLAMP - R.R     Op. 7210E10 R.R. FRONT BUMPER     Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R.     Op. 5505A13 ADDITIONAL JUNCTION UNIT IN ENGINE COMPARTMENT - R.R.     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R