199002271 - I010 DIRECTION INDICATORS / HAZARD WARNING LIGHTS NOT WORKING

		Test results
1	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the diagnostic equipment to the diagnostic socket and check the following at the Body Computer Node:- that there are no faults at the direction indicators- the plausibility of the direction indicators on/off parameter- check the operation of the direction indicator bulbs through active diagnosis	Move on to Step 4	1. Direction indicators faulty2. Parameter does not change status3. The bulbs do not come on	1. Continue following the instructions for the diagnostic equipment2. Move on to Step 23. Move on to Step 4
2	ELECTRICAL SYSTEM CHECK	All OK	Problems encountered	Operation
	Check the continuity of the wiring between the exterior lights control and the Body Computer Node    See E2020 DIRECTION INDICATORS / HAZARD WARNING LIGHTS	Move on to Step 3	Wiring broken	Renew the electrical connections    See E2020 DIRECTION INDICATORS / HAZARD WARNING LIGHTS
3	CHECK THE OPERATION OF THE HAZARD LIGHT KEY	All OK	Problems encountered	Operation
	Check the continuity of the key internal connections    See E2020 DIRECTION INDICATORS / HAZARD WARNING LIGHTS	Move on to Step 4	Key fault	Replace the button    Op. 7040A56 SWITCH UNIT IN DASHBOARD - R.R.
4	CHECK ON CORRECT OPERATION	All OK	Problems encountered	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Replace body computer    Op. 5505A32 BODY COMPUTER - R.R