1. Remove the protective plug and connect the bleed recovery device (pipe and reservoir) to the bleed cock on the clutch hydraulic/coaxial actuator three-way connector.2. Open the bleed cock on the clutch hydraulic/coaxial three-way connector.- Open the tool fluid reservoir tap slowly.- Wait for all the air in the hydraulic clutch release system to escape.- Push the oil pipe toward the hydraulic clutch actuator and lock with the clip.- Close the bleed valve on the clutch hydraulic/coaxial three-way connector and refit the protective cap in its seat.
- Remove the recovery device (pipe and reservoir)- Remove the brake-clutch bleed equipment.- Check that the cluch disengages and that the gears engage properly.- Check the fluid level in the brake-clutch reservoir is correct. Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R Op. 5530B10 BATTERY - R+R
