199002504 - 7210E38 R.R. REAR SIDE DOOR

Removing ( Refitting ) - Lower the window to the end of travel position.1. Undo the bolts (1a) fixing the limiter link (1b) to the body, then close the door momentarily so that the link is inside.2. Disconnect the electrical connection.
DescriptionComponent
LEFT REAR DOOR COUPLING    See D035 LEFT REAR DOOR COUPLING
RIGHT REAR DOOR COUPLING    See D036 RIGHT REAR DOOR COUPLING
3. Undo the bolts for the hinges.4. Lift up the door and remove it.
Refitting ( Removing ) - Check that the door is not damaged.1. Place the door on the hinges.2. Tighten the bolts for the hinges to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Moving hinges on fixedBoltM61.2 ÷ 1.8
3. Connect the electrical connection.- Check that the various consumers on the door are working.4. Pull out limiter (4a) out and tighten the bolt (4b) to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Door detent link (body side)BoltM82.25 ÷ 2.75
- Check the door alignment and, if necessary, carry out:    Op. 7010A14 REAR SIDE DOOR - ADJUST CENTERING AND MOULDING - INCLUDES ADAPTATION OF HINGES AND SEALS ON DOOR COMPARTMENT