199002616 - L020 PASSENGER SIDE TEMPERATURE ADJUSTMENT DOES NOT WORK

When the desired temperature is set, passenger side, this temperature is not implemented.
Test results
1CHECK ON CORRECT OPERATION OF CLIMATE CONTROL NODEAll OKProblems encounteredOperation
With the engine running and the compressor switched off, set the control unit to the AUTO function (MONO button off) and adjust the temperature using the passenger side temperature knob from cold to hot. Also select the recirculation button to the closed position and set the fan speed to 3-4 bars (display) and the distribution to front ventilation. Using the Examiner, check that the engine temperature has reached at least 70°C.Feel whether the air coming out of the vents varies in temperature (getting hotter).Now carry out the operations to check the passenger compartment cooling function: with the engine running, the ambient temperature around 20°C and the compressor on, set the control unit to AUTO mode, adjust the passenger side temperature knob from hot to cold up to 16°C, the distribution to the front position, the fan speed to 3 bars and the outside air intake function. After around 5 minutes in these conditions check, using the Examiner, that the temperature at the vents is decreasing: from the starting temperature of about 20°C (ambient temperature) gradually decreasing to around 6°C. Feel whether the air coming out of the vents is changing in temperature (getting colder)End of diagnosis1. The temperature of the air coming out of the vents does not get hotter2. The temperature of the air coming out of the vents does not get colder1. Move on to Step 22. Move on to Step 2
2CHECK USING DIAGNOSTIC EQUIPMENTAll OKProblems encounteredOperation
Connect the Examiner diagnostic equipment and check:- that there are no errors at the passenger side air mixture actuator;- that there are no faults in the treater air sensors.- that there are no faults in the outside temperature sensor;- that there are no faults in the passenger compartment temperature sensor;- that there are no faults in the solar sensor.Move on to Step 31. Short circuit or open circuit error at the air mixture actuator2. Error at treated air sensor3. Error at the outside temperature sensor4. Error at the passenger compartment temperature sensor5. Error at the solar sensor1. Move on to Step 42. Move on to Step 43. Move on to Step 44. Move on to Step 45. Move on to Step 4
3CHECK USING DIAGNOSTIC EQUIPMENTAll OKProblems encounteredOperation
Keeping the Examiner diagnostic equipment connected, check the operation of the air mixture actuator through active diagnosisMove on to Step 4Air mixture actuator not workingReplace the mixture actuator    Op. 5040D94 AIR CONDITIONING LEFT UPPER AIR DISTRIBUTION FLAP MOTOR (DEFROST) - R.R and/or    Op. 5040D96 AIR CONDITIONING RIGHT UPPER DISTRIBUTION FLAP MOTOR (DEFROST) - R.R
4ELECTRICAL CIRCUIT CHECKAll OKProblems encounteredOperation
Check the continuity/insulation of the electrical connection between the climate control node and the passenger side air mixture actuator and the treated air sensors and the outside temperature sensor and the passenger compartment sensor and the solar sensor.Check whether the electrical wiring is loose, disconnect the connectors, visually inspect for any damage to the connectors reconnecting the connectors to the climate control node, the passenger/driver side air mixture actuator, the outside temperature sensor and the solar sensorMove on to Step 51.Electrical connection broken or not insulated2. Electrical connection loose or damaged3. Outside temperature sensor not working4. Treated air sensor not working5. Solar sensor not working6. Passenger compartment temperature sensor7. Mixture actuator not working1.Restore the continuity/insulation of the electrical connection2. Renew the correct electrical connections3. Replace the outside temperature sensor4. Replace the treated air sensor5. Replace the solar sensor    Op. 5010D56 SOLAR SENSOR - R.R FOLLOWING ELECTRICAL SYSTEM CHECK 6. Replace the climate control system control unit    Op. 5040D14 CONTROL UNIT WITH AUTOMATIC AIR CONDITIONING CONTROL PANEL - R.R. 7. Replace the actuator    Op. 5040D94 AIR CONDITIONING LEFT UPPER AIR DISTRIBUTION FLAP MOTOR (DEFROST) - R.R and/or    Op. 5040D96 AIR CONDITIONING RIGHT UPPER DISTRIBUTION FLAP MOTOR (DEFROST) - R.R
5AIR MIXTURE MOTOR FLAP CHECKAll OKProblems encounteredOperation
Check that the air mixture motor flap completes its travel without any hinderanceEnd of diagnosis1. Flap travel incomplete2. Flap damaged3. Kinematic mechanism damaged1.Free the air mixer actuator flap from the impediment2. Replace the flap3. Repair kinematic mechanism