 | The following telephones are enabled to operate with the Bluetooth system and are supported by the system on the vehicle:- Audiovox®: SMT 5600 (Orange™ C500)*- Motorola®: Mpx220**, V3 Razr*, V525*, V600*, V635- Nokia®: 3230, 6230, 6230i, 6600†, 6620, 6820, 7610, 9500 Communicator*- Sony Ericsson®: k700i, k750i, P910a, S710a, T610**, T630**, T637**, Z600*** The system is not currently able to support a GPRS connection (General Packet Radio Services) when it is connected to this mobile phone.** The system is not currently able to support a hands-free system when it is connected to this mobile phone.† The system is not currently able to support call waiting when it is connected to this mobile phone. |
| | Test results |
| 1 | ERROR CHECK | All OK | Problems encountered | Operation |
|---|
| Check whether any of the errors are present using the diagnostic equipment:- B1003- B1004- B1005- B1008 | Move on to Step 4 | 1. It is not possible to connect to the control unit2. Error B1004 is present3. Error B1005 is present4. Errors B1005 and B1008 are present simultaneously5. Error B1003 is present | 1. Move on to Step 42. Move on to Step 23. Check that none of the protective fuses have blown. If they have, replace them. Then move on to Step 24. Replace the +30 fuse and move on to Step 75. Continue as instructed in the See table N069 THE BLUETOOTH CONTROLS ON THE STEERING WHEEL DO NOT WORK |
| 2 | ERROR DETECTION CONDITIONS CHECK | All OK | Problems encountered | Operation |
|---|
| Check in what circumstances the error occurs using the detailed screen. In particular, check whether the error is caused by:- Temperature too high or too low- Battery voltage too high- System status OFF | Move on to Step 3 | One or more of the conditions highlighted is detected at the time of the error | The Bluetooth® system is not capable of operating in irregular conditions.Check with the customer under what circumstances the error occurred in order to check the systems that may have caused the malfunctionMove on to Step 5 |
| 3 | BLUETOOTH® CHECK | All OK | Problems encountered | Operation |
|---|
| Carry out the Bluetooth disconnection active diagnosis on the convergence system and check whether the fault disappears | End of diagnosis | The fault persists | Move on to Step 4 |
| 4 | CHECK CAN LINE | All OK | Problems encountered | Operation |
|---|
| Check whether error U0019 is present on the diagnostic equipment | Move on to Step 6 | Error U0019 is present | Move on to Step 5 |
| 5 | ERRORS IN OTHER CONTROL UNITS CHECK | All OK | Problems encountered | Operation |
|---|
| Using the diagnostic equipment check that no other control unit has CAN errors. | Move on to Step 6 | Other control units also have network errors | Check which control unit is reponsible for the fault. If necessary, replace the faulty control units or the wiring |
| 6 | ELECTRICAL CIRCUIT CHECK | All OK | Problems encountered | Operation |
|---|
| Check the continuity and insulation of the electrical circuit between the buttons, Bluetooth control unit and radio See E3570 INTEGRATED RADIO PHONE | Move on to Step 7 | 1. Electrical connections faulty2. Faults in the buttons3. Faults in the Bluetooth® control unit connectors4. Faults in the radio connectors | 1. Restore the correct connections2. Replace the buttons Op. 5570T66 MODULE (ONE) ON STEERING WHEEL FOR RADIO CONTROL - R+R 3. Replace the Bluetooth® control unit Op. 5570T49 BLUETOOTH ELECTRONIC CONTROL UNIT - R.R. 4. Replace the radio Op. 5570T80 CAR RADIO EQUIPMENT - R+R |
| 7 | BLUETOOTH® CHECK | All OK | Problems encountered | Operation |
|---|
| Carry out the Bluetooth disconnection active diagnosis on the Bluetooth® system, delete the errors and check whether the fault disappears | End of diagnosis | The fault persists | Replace the Bluetooth® control unit Op. 5570T49 BLUETOOTH ELECTRONIC CONTROL UNIT - R.R. |