| | Test results |
| 1 | CUSHION FASTENINGS CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the cushion is correctly fastened to the vehicle floor | Move on to Step 2 | Cushion not correctly fastened to the vehicle floor | Retighten the cushion to the vehicle floor to the correct torque |
| 2 | CHECK ON MATCHING BETWEEN CUSHION UPHOLSTERY AND VEHICLE INTERIOR TRIM | All OK | Problems encountered | Operation |
|---|
| Check that matching of the cushion upholstery and the vehicle interior trim (wheel arch liners, door panels, etc.) | Move on to Step 3 | Interference with trims | Reposition the trims and/or carry out the correct cushion fitting cycle |
| 3 | CUSION HINGE MOVEMENT CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the cushion hinges move freely | Move on to Step 4 | Interference with foreign objects (e.g. carpet) | Eliminate the causes of the interference |
| 4 | HINGE CONDITION CHECK | All OK | Problems encountered | Operation |
|---|
| Check the condition of the cushion hinges (and the centre ones for split seats) and make sure they conform | End of diagnosis | 1. Centre hinged pin distorted2. Matching with interference betwen pin and seat in hinges | 1. Replace the centre pin2. Replace the cushion Op. 7045A14 FRONT SEAT CUSHION ASSEMBLY (ONE), LEFT OR RIGHT - R.R. |
