199002957 - D009 ENGINE NOT FEELING ACCELERATOR PEDAL PRESSURE

The customer complains that: The engine does not react when the accelerator pedal is operated
Test results
0PRELIMINARY CHECKSAll OKProblems encounteredOperation
Check that the engine oil level is correct    Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY Check that the air intake/vacuum circuit is working properly by carrying out the    See Test 1048OA AIR INTAKE/VACUUM CIRCUIT CHECKCheck the condition of the fuel supply circuit and make sure that it is working properly    See Test 1040OA FUEL SUPPLY CIRCUIT CHECKCheck the operation of the low pressure supply circuit    See Test 1060OB LOW FUEL DELIVERY PRESSURE CIRCUIT CHECKMove on to Step 1Oil level incorrectRestore the correct engine oil level    Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY
1MODE PARAMETERS CHECKAll OKProblems encounteredOperation
Select the following control unit at the diagnostic equipment: Electronic injection control unit EDC16C39 CF4/EOBD CAN (EP engine 1.9).Check the value of the following parameters:· Battery voltage    See Test 5530BB BATTERY VOLTAGE CHECK· Accelerator pedal· Accelerator position 1 AD/C· Accelerator position 2 AD/C    See Test 1068AC ACCELERATOR PEDAL CHECKS- Target Diesel pressure- Measured Diesel pressure    See Test 1060GH DIESEL PRESSURE CHECKMove on to Step 2
2ELECTRICAL SYSTEM CHECKAll OKProblems encounteredOperation
Check that fuse F59 has not blown (second from the left on the second row from the bottom)
Move on to Step 4Fuse F59 has blownRestore the connections or, if necessary, replace the junction unit in the engine compartment    Op. 5505A13 ADDITIONAL JUNCTION UNIT IN ENGINE COMPARTMENT - R.R.
3DIESEL PREHEATING RELAY CHECKAll OKProblems encounteredOperation
Check the diesel preheating relay circuitSee Test 5505AC End of diagnosis