7040H42 REAR PILLAR TRIM (ONE), LEFT OR RIGHT- R.R - Fiat - GRANDE PUNTO - eLearn

199000297 - 7040H42 REAR PILLAR TRIM (ONE), LEFT OR RIGHT- R.R

) - Remove the rear parcel shelf.- To work on the left trim. Op. 7040G30 BOOT LIGHT BULB HOLDER - R.R.- To work on the right trim. Op. 7065C86 CURRENT SOCKET IN LUGGAGE COMPARTMENT - R.R.- Raise the rear cushion.1. Undo the bolt.2. Move the end of the side rear seat belt.

1. Release the tailgate housing seal in the area of the rear pillar cover.2. Undo the bolts.3. Remove the pillar trim (3a) releasing the inner retainers (3b) and the side seat belt (3c).

Refitting ( Removing

) - Check that the trim is not damaged.- Place the trim in position and attach the side seat belt and the inner retainers.- Tighten the bolts.- Fit the tailgate housing seal.1. Position the end of the side rear seat belt.2. Tighten the bolt to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Seat belt end	Bolt	7/16”	3.15 ÷ 3.85

- Lower the rear cushion into place. Op. 7040G30 BOOT LIGHT BULB HOLDER - R.R. Op. 7065C86 CURRENT SOCKET IN LUGGAGE COMPARTMENT - R.R.- Position the rear parcel shelf.