199000428 - 1016E38 SINGLE CYLINDER HEAD OR (ONE) LEFT OR RIGHT, REMOVED - GRINDING

- Check that the planarity of the lower cylinder head plane corresponds to the recommended values.

Measurement	Value	Validity
Cylinder head lower surface flatness (mm)	0.1	1.3 Multijet1.9 Multijet

1. If the planarity of the lower cylinder head plane does not correspond to the recommended figures, regrind it without exceeding the minimum permitted height.

Measurement	Value	Validity
Minimum permitted cylinder head height (mm)	140.85 ÷ 141.15	1.9 Multijet