1064B42 SOLENOID CONTROLLING TURBOCHARGER VANE POSITION ACTUATOR - R.R - Fiat - GRANDE PUNTO - eLearn

199000536 - 1064B42 SOLENOID CONTROLLING TURBOCHARGER VANE POSITION ACTUATOR - R.R

) - Position the vehicle on a lift.- Disconnect the negative battery terminal.1. Disconnect the flexible pipe from the rigid pipe.

- Raise the vehicle. Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. 1. Disconnect the vacuum pipe from the turbocharger actuator.

1. Disconnect the electrical connection from the turbocharger vane position actuator solenoid valve.

	Description	Connector
1	Turbine variable geometry control solenoid	See L036 TURBINE VARIABLE GEOMETRY CONTROL SOLENOID VALVE

2. Unscrew the nuts (2a) and remove the turbocharger vane position actuator control solenoid valve (2b).

Refitting ( Removing

) - Refit the turbocharger vane position actuator control solenoid valve and secure with nuts.- Connect the electrical connection from the turbocharger vane position actuator solenoid valve.- Connect the vacuum pipe to the turbocharger actuator. Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. - Lower the vehicle.- Connect the vacuum hose to the rigid pipe.- Connect the negative battery terminal.- Remove the vehicle from the lift.