199000696 - 3310A60 FRONT BRAKE PADS - REPLACE

Removing ( Refitting )

The following procedure describes left front brake disc removal/refitting. Proceed in the same way for the right front brake disc.

- Position the vehicle on a lift.- Disconnect the negative battery terminal.    Op. 4450B12 FRONT WHEELS (TWO) - R+R 1. Disconnect the electrical connection for the brake pad wear sensor.

	Description	Connector
1	Left brake pad wear sensor (switch)	See K020 LEFT BRAKE PAD WEAR SENSOR (SWITCH)

2. Uncrew bolts (2a) securing brake caliper (2b) to the bracket and remove from its seat. - Secure the brake caliper to the suspension spring.1. Remove the front brake pads from the bracket. Refitting ( Removing ) - Grease the brake caliper and bracket in the areas of the pad support surfaces.- Place the front brake pads in their housings.- Fit the brake caliper and tighten the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front brake calipers - bracket side	Bolt	-	2.7 ÷ 3.3

- Connect the electrical connection to the brake pad wear sensor.    Op. 4450B12 FRONT WHEELS (TWO) - R+R - Connect the negative battery terminal.- Remove the vehicle from the lift.