199003601 - 5020A72 AIR INTAKE AND RECIRCULATION FLAP FAN/FLAP, L.H. OR R.H.-DISMANTLE AND REBUILD

Removing ( Refitting ) 1. Disconnect the electrical connection.
DescriptionComponent
OUTSIDE AIR/RECIRCULATION INTAKE FLAP ACTUATOR    See N082 OUTSIDE / RECIRCULATION AIR INTAKE FLAP ACTUATOR
2. Undo the bolt.3. Release the retainer (3a) from the housing and rotate the air intake assembly (3b) releasing the retainers (3c).4. Keep the air intake assembly.
1. If necessary, undo the bolts (1a) and remove the recirculation motor (1b) releasing the reference (1c) from the housing (1d).
Refitting ( Removing ) - Check that the air intake assembly is not damaged.- If removed, position the recirculation motor attaching the reference to the housing and secure it using the bolts.- Position the air intake assembly.- Rotate the air intake assembly into place and attach it to the retainers.- Tighten the bolt.- Connect the electrical connection.