199003604 - 5020B38 AIR DISTRIBUTION FLAP CONTROL CABLE - R+R

Removing ( Refitting ) - Remove the radio or, alternatively, the radio compartment box.    Op. 5570T80 CAR RADIO EQUIPMENT - R+R     Op. 7040A78 RADIO CONSOLE - R.R.     Op. 7040A38 SUPPORT FOR RADIO - R.R.    Op. 5020B10 HEATER CONTROL SUPPORT - R+R OR REPLACE- Work on the left side of the dashboard.    Op. 7040A30 LEFT LOWER DASHBOARD TRIM - R.R.    Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.    Op. 5010C55 LOWER AIR DIFFUSER (ONE) LH OR RH - R.R     Op. 7040A18 GLOVE COMPARTMENT IN DASHBOARD - ARRANGE 1. Release the sheath fastening retainer.2. Disconnect the ends of the transmission cables from the control lever.3. Recover the control cable. Refitting ( Removing ) - Check that the control cable is not damaged.- Connect the end of the transmission cable to the control lever.- Insert the sheath fastening retainer.    Op. 7040A18 GLOVE COMPARTMENT IN DASHBOARD - ARRANGE     Op. 5010C55 LOWER AIR DIFFUSER (ONE) LH OR RH - R.R     Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.    Op. 7040A30 LEFT LOWER DASHBOARD TRIM - R.R.    Op. 5020B10 HEATER CONTROL SUPPORT - R+R OR REPLACE 1. Rotate the temperature adjustment knob and check that the lever (1a) rotates correctly and that the cable (1b) slides freely in the outer casing (1c).2. If necessary, alter the position of the outer casing in relation to the retainer (2a) to ensure correct operation.Fasten the retainer definitively.