199000064 - 5040A40 AIR CONDITIONING CONDENSER - R+R

Removing ( Refitting )
Follow the safety instructions.    Op. 5040 AIR CONDITIONING CASING AND COMPONENTS
- Position the vehicle on a lift.- Drain the coolant.    Op. 0010T84 COOLANT FOR AIR CONDITIONING SYSTEM - DEHYDRATE AND REPRESSURIZE     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 7210E10 R.R. FRONT BUMPER     Op. 1048B50 SUPERCHARGING AIR-AIR HEAT EXCHANGER - R.R.1. Undo the bolt (1a) and disconnect the connector (1b) for the pipe from the condenser (1c).
Seal the connectors that have been disconnected using suitable plugs to prevent dampness and impurities from entering the system.
1. Undo the three bolts.2. Release the locating clip.3. Keep the condenser.
- If necessary, remove the dehydrating filter as follows:1. Release the retaining ring using suitable pliers.
1. Remove the cover with the filter element.2. Recover the dehydrating element cartridge.
Refitting ( Removing ) - Check that the condenser is intact and does not show signs of damage or deposits of dirt on the finned surface.- If removed, refit the dehydrating filter by fitting the dehydrating element and cover with filter element. Attach the circlip.
Replace the O rings for the connectors.
Only use green coloured seals that are resistant to R134a coolant.
Lubricate the connector threads using anti-freeze.
- Position the condenser in its seat and do up the locating spring.- Tighten the condenser fixing bolts.1. Connect the connector (1a) to the condenser (1b) and tighten the bolt (1c) to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Pipe connector on condenserBoltM81.8 ÷ 2.2
    Op. 1048B50 SUPERCHARGING AIR-AIR HEAT EXCHANGER - R.R.    Op. 7210E10 R.R. FRONT BUMPER     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. - Repressurize the coolant.    Op. 0010T84 COOLANT FOR AIR CONDITIONING SYSTEM - DEHYDRATE AND REPRESSURIZE