199000507 - 1060E10 DIESEL INJECTION PRESSURE PUMP - R.R.

Removing ( Refitting )     Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 1092G10 SINGLE ENGINE BELT - R.R     Op. 1092A10 CRANKSHAFT PULLEY - R + R     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE     Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - R + R     Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.     Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R     Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT     Op. 1060E30 PRESSURE PUMP DRIVE PULLEY - R.R. 1. Disconnect the electrical connection for the fuel pressure regulator on the pressure pump.

	Description	Connector
1	Fuel pressure regulator	See N077 FUEL PRESSURE REGULATOR

2. Disconnect the fuel supply pipe rapid connector, pressure pump side.3. Loosen the band and disconnect the fuel return pipe from the pressure pump to the fuel return manifold, pressure pump side. 1. Undo the connector (1a) and disconnect the pipe from the pressure pump to the fuel manifold (1b), pressure pump side.2. Undo the nuts (2a) and remove the pressure pump (2b) from the support. Refitting ( Removing ) - Position the pressure pump in its housing and secure it by tightening the nuts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Pressure pump	Nut	M8	2.3 ÷ 2.8	1.9 Multijet

- Connect the pipe from the pressure pump to the fuel manifold, pressure pump side and tighten the connector to the recommended torque.

The pipe from the pressure pump to the fuel manifold, pressure pump side is replaced each time the connectors are loosened.

    Op. 1060F20 PIPE FROM PRESSURE PUMP TO FUEL MANIFOLD - R.R.

Component	Fastening	dia	Value (daNm)	Validity
Pipe from pressure pump to fuel manifold - pressure pump side	Connector	M12	2.2 ÷ 2.4	1.9 Multijet

- Connect the fuel return pipe from the pressure pump to the fuel return manifold, pressure pump side and tighten the band.- Connect the fuel supply pipe rapid connector, pressure pump side.- Connect the electrical connection to the fuel pressure regulator on the pressure pump.    Op. 1060E30 PRESSURE PUMP DRIVE PULLEY - R.R.     Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT     Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R     Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.     Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - R + R     Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 1092A10 CRANKSHAFT PULLEY - R + R     Op. 1092G10 SINGLE ENGINE BELT - R.R     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 1016A10 SOUND-PROOFING COVER - R.R