199000730 - 3340B55 RIGID PIPE FROM HYDRAULIC CONTROL UNIT TO LEFT FRONT BRAKE - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 3330C10 MASTER CYLINDER (PUMP) - R + R     Op. 4450B02 LEFT FRONT WHEEL - R.R 1. Undo the connector for the rigid pipe from the ABS control unit.- Undo the rigid pipe clips.
1. Undo the connector (1a) and remove the rigid pipe (1b).
Refitting ( Removing ) - Position the rigid pipe and connect it to the left front brake caliper flexible pipe tightening the connector to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Brake pipe connectorsConnectorM101.4 ÷ 1.8
- Do up the rigid pipe clips.- Tighten the connector fixing the rigid pipe to the ABS control unit to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Rigid pipes from hydraulic control unit to left front/rear brakes - control unit sideConnectorM101.4 ÷ 1.8
    Op. 4450B02 LEFT FRONT WHEEL - R.R     Op. 3330C10 MASTER CYLINDER (PUMP) - R + R     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R - Remove the vehicle from the lift.