199000732 - 3340B62 RIGID PIPE (ONE), LEFT OR RIGHT, FROM HYDRAULIC CONTROL UNIT WITH PIPE CONNECTOR TO REAR BRAKES - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.For the Sport version- Remove the underbody protection on the left hand side, refer to    Op. 7055B80 UNDERBODY SIDE PROTECTION (ONE) LEFT OR RIGHT - R.R.    Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 3330C10 MASTER CYLINDER (PUMP) - R + R     Op. 4450B02 LEFT FRONT WHEEL - R.R 1. Undo the connector for the rigid pipe from the ABS control unit.- Undo the rigid pipe fastening clips. 1. Open clips (1a), undo connector (1b) and remove rigid pipe (1c). Refitting ( Removing ) - Place the rigid pipe in position, close the clips and tighten the connector to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Brake pipe connectors	Connector	M10	1.4 ÷ 1.8

- Tighten the connector, fastening the rigid pipe to the ABS control unit to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Rigid pipes from hydraulic control unit to right front/rear brakes - control unit side	Connector	M12	1.4 ÷ 1.8

    Op. 4450B02 LEFT FRONT WHEEL - R.R     Op. 3330C10 MASTER CYLINDER (PUMP) - R + R     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR For the Sport version- Place the underbody protection on the left hand side in position, refer to    Op. 7055B80 UNDERBODY SIDE PROTECTION (ONE) LEFT OR RIGHT - R.R.    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R - Remove the vehicle from the lift.