199000937 - 1820B48 SUPPLY HOSE TO OPERATING CYLINDER - R.R.

Removing ( Refitting ) Proceed as described below for left-hand drive version    Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R - Unscrew the brake fluid reservoir cap and fit the tool.
ToolDescriptionFunctionValidity
2000001400PlugBrake/ clutch system vacuum
1. Undo bolts (1a) and remove bracket (1b).
1. Undo connector (1a) and disconnect rigid pipe (1b) from the hose.2. Lift up spring (2a) and remove pipe (2b) from the additional vibration damper.
Proceed as described below for right-hand drive version    Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 1820B56 RIGID PIPE FROM VIBRATION DAMPER TO SLAVE CYLINDER - R R Refitting ( Removing ) Proceed as described below for left-hand drive version- Connect the hose to the additional vibration damper and secure it with the retaining clip.- Connect the hose to the rigid pipe and tighten the connector.- Fit the bracket in its housing and secure it using the bolts.    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R Proceed as described below for right-hand drive version    Op. 1820B56 RIGID PIPE FROM VIBRATION DAMPER TO SLAVE CYLINDER - R R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR