199000939 - 1820B58 CLUTCH HYDRAULIC CIRCUIT VIBRATION DAMPER - R+R

Removing ( Refitting ) Proceed as described below for left-hand drive version    Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R 1. Move back clip (1a) and disconnect damper (1b) from the master cylinder.2. Move back clip (2a) and disconnect hose (2b) from the slave cylinder three-way connector.3. Remove the damper complete with the pipe.- Retract the clip and disconnect the damper from the rigid pipe.
Proceed as described below for right-hand drive version    Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R 1. Lift up retaining clip (1a) and disconnect rigid pipe (1b) from the vibration damper.
1. Lift up retaining clip (1a), disconnect rigid pipe (1b) from vibration damper (1c) and remove it.
Refitting ( Removing ) Proceed as described below for left-hand drive version- Connect the damper to the rigid pipe and secure the clip.- Place the damper complete with pipe in position.- Connect the hose to the slave cylinder three-way connector and secure the clip.
ComponentFasteningdia  Value (daNm)Validity
Flexible supply pipe to operating cylinderConnector-1.3 Multijet1.9 Multijet
- Connect the damper to the master cylinder and fasten the clip.    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR Proceed as described below for right-hand drive version- Connect the vibration damper to the respective pipes and secure them with the retaining clips.    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR