199001052 - 5560BX CHECK CONTROL PANEL OPERATION
Disconnect the control panel connector, identify the relevant input pins, press the relevant function button and check the resistance values are as shown in the attached table:| Button | Pin | Resistance |
|---|---|---|
| UP | 1-3 | 170 Ohm |
| DOWN | 1-3 | 890 Ohm |
| MENU ESC | 1-4 | 855 Ohm |
| MODE+ | 1-4 | 210 Ohm |
| Fog light | 1-6 | 25 Ohm |
| Rear fog lamp | 1-7 | 25 Ohm |
| MODE- | 1-12 | 25 Ohm |
| PIN | FUNCTION |
|---|---|
| 1 | Earth |
| 2 | + 15 symbol lighting |
| 3 | Headlamp alignment UP command - headlamp alignment DOWN command |
| 4 | Menu ESC – Mode + |
| 5 | N.C. |
| 6 | Fog light control |
| 7 | Fog lamp control |
| 8 | N.C. |
| 9 | N.C. |
| 10 | N.C. |
| 11 | N.C. |
| 12 | MODE- command |