199001645 - 1820B47 RIGID PIPE FROM MASTER CYLINDER (PUMP) TO VIBRATION DAMPER - R. R. FOR RIGHT HAND DRIVE VERSIONS

Removing ( Refitting )     Op. 1016A10 SOUND-PROOFING COVER - R.R 1. Undo the cap and tighten the tool on the brake-clutch fluid reservoir.
ToolDescriptionFunctionValidity
2000001400PlugBrake/ clutch system vacuum
1. Adjust the clip (1a) and disconnect the connector (1b) for the rigid supply pipe (1c) from the clutch pump.
1. Adjust the clip (1a), disconnect the rigid supply pipe (1b) from the vibration damper and remove it.
Refitting ( Removing ) - Place the rigid supply pipe in position and connect it to the vibration damper using the retaining clip.- Connect the connector for the rigid supply pipe to the clutch pump using the retaining clip.    Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR