199001652 - 3340B53 RIGID PIPE (ONE) FROM MASTER CYLINDER (PUMP) TO ABS HYDRAULIC CONTROL UNIT - R.R. FOR RIGHT HAND DRIVE VERSIONS

Removing ( Refitting )     Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 1044B10 FUEL FILTER ASSEMBLY - R + R OR REPLACE 1. Undo the cap and tighten the tool onto the brake/clutch fluid reservoir.

Tool	Description	Function	Validity
2000001400	Plug	Brake/ clutch system vacuum

Mark the pipe to be removed on the brake pump and A.B.S.control unit side connectors.

1. Undo connector (1a) and open clips (1b) securing rigid pipe (1c). 1. Undo connector (1a) and move rigid pipe (1b) away from the brake pump.2. Undo connector (2a) and remove rigid pipe (2b) from the brake pump. Refitting ( Removing ) - Fit the rigid pipes in their seats and tighten the connectors to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Brake pipe connectors	Connector	M10	1.4 ÷ 1.8

- Close the rigid pipe retaining clips.    Op. 1044B10 FUEL FILTER ASSEMBLY - R + R OR REPLACE     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR