199002808 - P0110 Air flow meter air temp. signal

This error is detected if the junction unit inlet voltage (Pin 53) is greater than 4.95 V (with Beyond the upper limit detail) or less than 0.05 V (with below the lower limit detail). In this case the junction unit replacement value is 40 °C.

		Test results
1	SUPERCHARGING TEMPERATURE SENSOR CHECK	All OK	Problems encountered	Operation
	Check that the supercharging temperature sensor is working properly, following the instructions in the    See Test 1064BE CHECK TURBO VALVE PROTECTION FUSE	End of diagnosis	-	-