199003032 - P0120 Accelerator pedal sensor 1

This error is detected if, with fault code P0641 not recognized, the junction unit input voltage (Pin 9) is more than 4.67 V (positive short circuit) or less than 0.15 V. As a consequence the accelerator pedal does not operate.
Test results
0PRELIMINARY CHECKSAll OKProblems encounteredOperation
Connect the diagnostic tester and select Bosch diesel injection control unit EDC16C39 CF4/EOBD CAN (EP engine 1.9), checking that none of the following errors is present:- P0651Move on to Step 1Error P0651 presentProceed as instructed in the    See Test 1060GN CHECK ENGINE CONTROL UNIT CONNECTIONS
1ACCELERATOR PEDAL CHECKAll OKProblems encounteredOperation
Check that the accelerator pedal is working properly, carrying out the    See Test 1068AC ACCELERATOR PEDAL CHECKSEnd of diagnosis--