199003036 - P0168 Limitat. for fuel high temp.

This error is detected if there is a mechanical problem with the engine or if the system is overheating as a result of overloading The quantity of fuel injected is reduced as a result.

		Test results
1	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the diagnostic tester and select Bosch diesel injection control unit EDC16C39 CF4/EOBD CAN (EP engine 1.9), checking that none of the following errors is present:- P0180- P1612	Move on to Step 2	Error P0180 is present	Proceed as instructed in the    See Test 1060EA DIESEL TEMPERATURE CHECK
			Error P1612 is present	Proceed as instructed in theSee Test 5505AC
2	ENGINE COOLING SYSTEM CHECK	All OK	Problems encountered	Operation
	Check the fuel cooling system is working properlyCheck the engine cooling system is working properly.Check that there are no engine oil leaks and that the engine oil level is correct    Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY If all these conditions are followed, the malfunction is caused by poor use of the engine	End of diagnosis	Malfunction of the fuel cooling system	Restore the correct operation of the system
			Malfunction of the engine cooling system	Restore the correct operation of the system
			Engine oil leaks	Continue as instructed in theSee table X012
			Engine oil level beyond permitted limits	Restore the correct engine oil level    Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY