199003079 - P0340 Phase sensor

This error is detected if the engine is running and the control unit cannot synchronize the camshaft signal (with signal plausibility detail) or the camshaft signal is not recognized (with general electrical fault detail).

		Test results
0	PRELIMINARY CHECKS	All OK	Problems encountered	Operation
	Check that the error detail is not signal plausibility	Move on to Step 3	The detail is signal plausibility	Move on to Step 1
1	ENGINE SPEED CHECK	All OK	Problems encountered	Operation
	Check that the engine speed is correct by carrying out the    See Test 1060GI CHECK ENGINE SPEED	Move on to Step 2	-	-
2	CHECK ON CORRECT ENGINE TIMING	All OK	Problems encountered	Operation
	Check that the engine timing is correct    Op. 0510A20 TIMING GEAR WITH BELT DRIVE - CHECK - CARRY OUT OPERATION WITH TAPPET COVER(S) REMOVED AND TAPPETS ADJUSTED AND CRANKSHAFT PULLEY DETACHED (IF NECESSARY)	Move on to Step 3 ]	Timing not correct	Restore the correct engine timing    Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT
3	TIMING SENSOR CHECK	All OK	Problems encountered	Operation
	Check correct operation of the timing sensor by carrying out the    See Test 5510CG CHECK TIMING SENSOR OPERATION	End of diagnosis	-	-