199003082 - P0402 EGR valve

This error is detected if the quantity of exhaust gas recirculation is too high. As a result, the exhaust gas recirculation valve is switched off and the supercharging pressure can longer be controlled and the quantity of fuel injected is reduced.
Test results
0PRELIMINARY CHECKSAll OKProblems encounteredOperation
Check the seal of the inlet/supercharging system hoses.Check the hoses and connected pipes to identify any obstructions, damage etc.Check that the pipe restriction bands in the air intake/inlet system are correctly fitted.Move on to Step 1Connections faulty, obstructions or porousnessRenew or, if necessary, replace the faulty components
1CHECK USING DIAGNOSTIC EQUIPMENTAll OKProblems encounteredOperation
Select the following system on the diagnostic equipment: Bosch diesel injection control unit EDC16C39 CF4/EOBD CAN (EP engine 1.9) and check the following parameters:- Air temperature in the intake manifoldSee Test 1064BD - Turbo pressure Objective- Turbo pressure Measured    See Test 1060GF SUPERCHARGING PRESSURE CHECK- Measured air mass    See Test 1060GG CHECK MEASURED AIR MASSEnd of diagnosis--